Skip to product information
White light variant card, 6000-6500K, 72 LEDs, 3600mAh, IPX5

Solar Wall Light Outdoor — 72 LED Motion Sensor, 4 Lighting Modes, 3600mAh, IPX5 Waterproof

Inquiry for Best Price
Light Color

Solar Wall Light Outdoor — 72 LED Motion Sensor Sconce

Light on the path before you reach the door. A monocrystalline panel charges through the day; after dark the light switches itself on, and a PIR sensor lifts it to full brightness the moment someone steps within six metres.

  • 72 × SMD2835 LEDs behind a double-layer PC shade — even, glare-free spread with no hot spots
  • Four lighting levels: dim + motion boost, dark + motion boost, always bright, always dim
  • 3600mAh built-in battery (2 × 18650) — 6–12 hours of run time from a 4–6 hour charge
  • IPX5 sealed housing with a rubber gasket ring — rain, dew and dust stay out
  • White light 6000–6500K or warm light 2800–3500K — pick the tone at checkout

Solar motion sensor wall light glowing on a wooden clad house wall at night

Feature icons: solar charging, waterproof, easy installation, human body sensor, durable lamp body, high-capacity battery

Even brightness you can sit under

The PC shade diffuses the 72 LEDs into a flat, wide wash instead of a hard cone, so a patio table or a doorway stays usable after sunset.

Solar wall light lighting a garden wall evenly at night

Built for the rainy season

A rubber gasket ring seals the housing at every joint, and the panel is machine-laminated rather than taped. Tested against rain, thunderstorms and snow — the light keeps running when the weather turns.

Solar wall light still lit in heavy rain on a concrete wall

Dusk to dawn, automatically

A built-in photosensitive sensor does the switching: charging by day, lit at night. No timer to reset, no app, no switch to remember.

Solar wall light charging in daylight and lit automatically at night

No wiring, no electricity bill

The 5V / 2.2W monocrystalline panel converts more of the day's light into stored charge than the polycrystalline panels common at this price, so it recovers faster after overcast weather.

Monocrystalline solar panel on top of the wall light charging in sunlight

Six metres of warning

The PIR sensor picks up movement up to 6 metres away across a 120° field — enough to light a driveway, a gate pillar or a side path before anyone reaches the door.

Motion sensor wall lights detecting a person approaching a garage at night

Four lighting levels

  • Level 1 — dim standby, jumps to full brightness on detection
  • Level 2 — dark standby, full brightness on detection (longest runtime)
  • Level 3 — constant high brightness, sensor off
  • Level 4 — constant low brightness, sensor off

Chart of the four lighting levels: dim plus sensor, dark plus sensor, always bright, always dim

Specifications

Specification table with dimensions 22.3 by 9.1 by 14.8 cm

  • Model: YH0632-PIR
  • Solar panel: monocrystalline silicon, 5V / 2.2W
  • Battery: 3.7V / 1800mAh × 2 (18650) — 3600mAh total
  • Light source: 72 × SMD2835, 0.2W each
  • Colour temperature: 2800–3500K (warm light) / 6000–6500K (white light)
  • Working time: 6–12 hours · Charging time: 4–6 hours
  • Motion sensing: up to 6 m, 120° detection angle
  • Waterproof rating: IPX5 (data sourced from the manufacturer's own laboratory)
  • Material: ABS + PC · Colour: black housing with off-white shade
  • Dimensions: 22.3 × 9.1 × 14.8 cm
  • Packing: inner box 23.5 × 16 × 10.5 cm, 0.82 kg

What's in the box

1 × solar wall light, mounting bracket, 3 × screws, 3 × wall plugs, user manual.

What is in the box: wall light, mounting plate, screws, wall plugs, user manual, and package dimensions

Close-up detail shots of the PIR sensor, solar panel, double-layer shade and waterproof rubber ring

Where it works

Front doors and gate pillars, villa gardens, balconies, patio walls, fences, stairwells and exterior corridors — anywhere the panel can face open sky.

Solar wall lights installed on villas, garden walls, terraces and exterior corridors

Two ways to mount it

Drill mount: mark the bracket, drill, fix the screws, then hang the light. Adhesive mount: arm the switch, apply 3M tape or nail-free glue (not included), press onto a clean flat surface. Either way takes a few minutes and needs no electrician.

Drill installation steps: drill the holes, fix the screws, press the switch, hang the light

Adhesive installation steps: press the switch, apply tape or glue, stick to the wall, light turns on at night

Before you install

Point the panel at direct sunlight. Under a deep eave, indoors, or behind foliage the battery will not charge and the light will not run — that is the solar charging limit, not a fault. Turn the switch on before first use, or the panel will not store energy.

Correct versus blocked solar panel placement, with a note on how solar charging works

You may also like